Adjustable Magnetic Optics Adapter

Our Adjustable Magnetic Optics Adapter was built to be a practical, affordable and quick digiscoping system, made for the people.

Use your own phone case, with any smartphone, on most modern optics. 

The patented Full Frame digiscoping system comes with the "Nanner", our banana shaped metal clip that attaches to the back of your phone case, our alignment tool, and the adjustable magnetic optics adapter.

Important Compatibility Tips:

Our system is compatible with most modern optics due to our unique mechanism that allows users to make fine tune adjustments. However, there are some things to take note of to insure a reliable connection in the field. 

Use a smooth, hard plastic phone case of your choosing

The best part of the Full Frame design is the ability for you to use your own phone case. We recommend using a phone case that has a smooth backing and is made of a hard plastic material. The following types of phone cases are examples that will not work well with the tape that adheres the Nanner to your case:

• Soft silicone phone cases
• Strongly textured phone cases
• Phone cases with holes or indents
• Phone cases with an attached battery pack or other raised features 

While our adapter does work on most modern optics, it does not fit well on the Swarovski BTX eye piece. To ensure accurate compatibility, make sure the diameter of your eye piece is greater than 44mm. 

If you are still unsure if this system will work with your optic, reach out to us and our in house engineer can help make sure you are set up for success. 

Support@fullframeoutdoors.com

The Full Frame digiscoping system includes:

Watch our instructional video to learn how to set up the Full Frame Digiscoping System. 

Cheek Riser Installation

1. Position the Cheek Riser on the rifle stock for optimal cheek weld comfort. Ensure it's placed far enough back to allow for bolt removal without needing to uninstall the riser.
2. Mark the screw hole location. While the riser is placed in your predetermined optimal position, pre-drill a pilot hole in the stock using a 1/8" drill bit.
3. Insert the screw. Tighten snugly but do not overtighten.

Note: If you do not want to drill a hole into your stock, you can use double-sided 3M tape in place of the provided screw.

Vertical Grip Installation

1. If a Tikka vertical grip is on your rifle, you can remove it by loosening and extracting the hex bolt. (Please keep this original hex bolt)
2. Align and place the Full Frame Vertical Grip in the mounting position.
3. Insert the original Tikka hex bolt into the Full Frame Vertical Grip and tighten. Ensure a firm fit without stripping threads.
   

Bag Rider Installation

1. Remove the butt pad screws and sling stud screw from the rifle stock.
2. Position the Bag Rider between the butt pad and stock.
3. Reinstall the butt pad using the original screws, sandwiching the Bag Rider in place.
4. Replace the sling stud with the larger screw that we provided. Tighten securely.

NOTE: This kit includes a Cheek Riser that may require drilling a hole into the factory stock. Modifying your rifle should be done with care using proper tools. Full Frame Outdoors is not responsible for damage, voided warranties, or injury resulting from improper installation or misuse of this product. If you are not comfortable drilling into your stock, please have a qualified gunsmith perform the installation.